 |
 |
 |
 |
Kit (Without Blades)
BL4020-1100KV Brushless motor
N630hv cyclic Servo*3PCS
N650hv tail Servo*1PCS
- Specifications:
- Length-1120mm
- Height-350mm
- Width-176mm
- Main Rotor Diameter-260mm
- Tail Blade Length-92mm
- Motor Pinion-21T
- Motor KV-1100KV
- Driving Gear-(21/54)(17/56)
- Gear Ratio-21T (8.46-1)
- Tail Gear Ratio-(3.86-1)
- Weight W/O Power-2700g
- Flying Weight-3500g
- Battery-22.2v - 5000mah
- ESC-120a
Includes: BL4020-1100KV Brushless motor N630hv cyclic Servo*3PCS N650hv tail Servo*1PCS EBAR V2 Flybarless system Required: 120+ amp Brushless Electronic Speed Controller, Radio System, Batteries, Main and tail blades. **Additional components may be required depending on setup and/or flying style**
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Product Description:
- Agile 5.5 was designed to offer something different; not just an improvement but a head start over what is commonly done. Agile 5.5 was created to fit each type of flight: Low to high speed, soft to hard 3D maneuvers and those not yet imagined!
- Clever solutions were used to provide top-notch performance with very responsive controls, thus giving a feeling of incredible strength and outstanding smoothness of motion.
- To make sure that nothing is left to chance, and to bring you the best overall design around, hundreds of test flights were performed by top international pilots.
- Whatever story it is, the following sums it up: Agile stands for Agility!
- Enjoy your Agile 5.5, you can’t go wrong!
- Just add a set of main blades ,tail blades and an ESC and you're ready to go!
|
|
 |
 |
 |
 |

|